當前位置:首頁 > 產品中心 > 西門子PLC模塊 > 西門子S7-1500PLC模塊 > SM531模擬量輸入模塊
簡要描述:SM531模擬量輸入模塊,模擬量輸入模塊可以記錄壓力或溫度等過程信號,并以數字形式(16 位形式)將它們傳送給控制器。這些模塊適用于測量電流(2 線制和 4 線制傳感器)、電壓和電阻,并適合連接電阻溫度計和熱電偶(測量類型取決于模塊)
詳細介紹
SM531模擬量輸入模塊,西門子SM531模擬量輸入模塊,西門子S7-1500模擬量輸入模塊,西門子模擬量輸入模塊,模擬量輸入模塊
模擬量輸入模塊可以記錄壓力或溫度等過程信號,并以數字形式(16 位形式)將它們傳送給控制器。這些模塊適用于測量電流(2 線制和 4 線制傳感器)、電壓和電阻,并適合連接電阻溫度計和熱電偶(測量類型取決于模塊)。
提供有以下模擬量輸入模塊:
代理西門子PLC模塊200/300/400/1200/S71500 siemens 西門子變頻器,MM440/430/420/G120/6RA70/6ES70/6RA80等系列變頻器及備件。西門子觸摸屏,西門子軟啟動器,西門子低壓產品,西門子數控伺服,西門子傳動,西門子樓宇,西門子工控系列模塊,
西門子 現貨銷售 質保一年 歡迎詢價
SIEMENS 上海翰粵自動化系統有限公司
上海翰粵自動化系統有限公司是中國西門子的合作伙伴,公司主要從事工業自動化產品的集成,銷售各維修。致力于為您提供在工業、化工、水泥、電力、環保等領域的電氣及自動化技術的完整解決方案,包括自動化產品及系統、工程項目執行及管理、主要過程控制領域,以及專業的售后服務、培訓等。
上海翰粵代理銷售以下系列產品:
SIEMENS 可編程控制器
1、 SIMATIC S7 系列PLC:S7-200、S7-1200、S7-300、S7-400、ET-200,S71500
2、 邏輯控制模塊 LOGO!230RC、230RCO、230RCL、24RC、24RCL等
3、 SITOP直流電源 24V DC 1.3A、2.5A、3A、5A、10A、20A、40A可并聯.
4、HMI 觸摸屏TD200 TD400C K-TP OP177 TP177,MP277 MP377,
SIEMENS 交、直流傳動裝置
1、 交流變頻器 MICROMASTER系列:MM420、MM430、MM440、G110、G120.
MIDASTER系列:MDV
2、全數字直流調速裝置 6RA23、6RA24、6RA28、6RA70、6SE70系列
SIEMENS 數控 伺服
SINUMERIK:801、802S 、802D、802D SL、810D、840D、611U、S120
系統及伺報電機,力矩電機,直線電機,伺服驅動等備件銷售。
型號及訂貨號
訂貨號:6ES7531-7KF00-0AB0 SIMATIC S7-1500, 模擬量輸入模塊 AI 8xU/I/RTD/TC, 16 位 分辨率, 準確度 0,3%, 8 通道 8 個一組, 4 通道 bei RTD 測量, 共模電壓 10V; 診斷;Prozessalarme inkl. Einspeiseelement, 屏蔽支架 和 屏蔽端子 |
訂貨號:6ES7531-7NF00-0AB0 SIMATIC S7-1500, 模擬量輸入模塊 AI 8xU/I HF, bis zu 24 位 分辨率, 準確度 0,1%, 8 通道 8 個一組, 共模電壓: 30V AC/60V DC, 診斷;Prozessalarme inkl. Einspeiseelement, 屏蔽支架 和 屏蔽端子 |
訂貨號:6ES7531-7NF10-0AB0 SIMATIC S7-1500, 模擬量輸入模塊 AI 8xU/I HS, 16 位 分辨率, 準確度 0,3% 8 通道 8 個一組, 共模電壓 10V; 診斷;Prozessalarme 8 通道 in 0,0625ms inkl. Einspeiseelement, 屏蔽支架 和 屏蔽端子 |
訂貨號:6ES7531-7PF00-0AB0 SIMATIC S7-1500, 模擬量輸入模塊 AI 8xU/R/RTD/TC HF, 16 位 分辨率, 準確度 0,1%, 8 通道 8 個一組, 共模電壓: 30V AC/60V DC, 診斷;Prozessalarme inkl. Einspeiseelement, 屏蔽支架 和 屏蔽端子 |
訂貨號:6ES7531-7QD00-0AB0 SIMATIC S7-1500, 模擬量輸入模塊 AI 4xU/I/RTD/TC, 16 位 分辨率, 準確度 0,3%, 4 通道 8 個一組, 2 通道 bei RTD 測量, 共模電壓 10V; 診斷;Prozessalarme inkl. 前連接器 直插式, Einspeiseelement,屏蔽支架, 屏蔽端子 |
模擬量輸入模塊可以記錄壓力或溫度等過程信號,并以數字形式(16 位形式)將它們傳送給控制器。這些模塊適用于測量電流(2 線制和 4 線制傳感器)、電壓和電阻,并適合連接電阻溫度計和熱電偶(測量類型取決于模塊)。
提供有以下模擬量輸入模塊:
含在供貨范圍之內:
Article number | 6ES7531-7QD00-0AB0 | 6ES7531-7KF00-0AB0 | 6ES7531-7NF10-0AB0 | 6ES7531-7NF00-0AB0 | |
---|---|---|---|---|---|
| S7-1500, AI 4XU/I/RTD/TC ST | S7-1500, AI 8XU/I/RTD/TC ST | S7-1500, AI 8XU/I HS | S7-1500, AI 8XU/I HF | |
General information |
|
|
|
| |
Product type designation | AI 4xU/I/RTD/TC ST | AI 8xU/I/RTD/TC ST | AI 8xU/I HS | AI 8xU/I HF | |
HW functional status | FS01 | FS01 | FS01 | FS01 | |
Firmware version | V1.0.0 | V2.0.0 | V2.1.0 | V1.1.0 | |
| Yes | Yes | Yes | Yes | |
Product function |
|
|
|
| |
| Yes; I&M0 to I&M3 | Yes; I&M0 to I&M3 | Yes; I&M0 to I&M3 | Yes; I&M0 to I&M3 | |
| No | No | No | No | |
| No | No | No | Yes | |
| No | No | No | Yes | |
Engineering with |
|
|
|
| |
| V13 / V13.0.2 | V12 / V12 | V14 / - | V14 / - | |
| V5.5 SP3 / - | V5.5 SP3 / - | V5.5 SP3 / - | V5.5 SP3 / - | |
| V1.0 / V5.1 | V1.0 / V5.1 | V1.0 / V5.1 | V1.0 / V5.1 | |
| V2.3 / - | V2.3 / - | V2.3 / - | V2.3 / - | |
Operating mode |
|
|
|
| |
| No | No | Yes | No | |
| Yes | Yes | Yes | Yes | |
CiR – Configuration in RUN |
|
|
|
| |
Reparameterization possible in RUN | Yes | Yes | Yes | Yes | |
Calibration possible in RUN | Yes | Yes | Yes | Yes | |
Supply voltage |
|
|
|
| |
Rated value (DC) | 24 V | 24 V | 24 V | 24 V | |
permissible range, lower limit (DC) | 20.4 V | 20.4 V | 20.4 V | 20.4 V | |
permissible range, upper limit (DC) | 28.8 V | 28.8 V | 28.8 V | 28.8 V | |
Reverse polarity protection | Yes | Yes | Yes | Yes | |
Input current |
|
|
|
| |
Current consumption, max. | 140 mA; with 24 V DC supply | 240 mA; with 24 V DC supply | 240 mA; with 24 V DC supply | 50 mA; with 24 V DC supply | |
Encoder supply |
|
|
|
| |
24 V encoder supply |
|
|
|
| |
| Yes | Yes | Yes |
| |
| 20 mA; Max. 47 mA per channel for a duration < 10 s | 20 mA; Max. 47 mA per channel for a duration < 10 s | 20 mA; Max. 47 mA per channel for a duration < 10 s |
| |
Power |
|
|
|
| |
Power available from the backplane bus | 0.7 W | 0.7 W | 1.15 W | 0.85 W | |
Power loss |
|
|
|
| |
Power loss, typ. | 2.3 W | 2.7 W | 3.4 W | 1.9 W | |
Analog inputs |
|
|
|
| |
Number of analog inputs | 4 | 8 | 8 | 8 | |
| 4 | 8 | 8 | 8 | |
| 4 | 8 | 8 | 8 | |
| 2 | 4 |
|
| |
| 4 | 8 |
|
| |
permissible input voltage for voltage input (destruction limit), max. | 28.8 V | 28.8 V | 28.8 V | 28.8 V | |
permissible input current for current input (destruction limit), max. | 40 mA | 40 mA | 40 mA | 40 mA | |
Technical unit for temperature measurement adjustable | Yes; °C/°F/K | Yes; °C/°F/K |
|
| |
Analog input with oversampling | No |
|
|
| |
Standardization of measured values | No |
|
|
| |
Input ranges (rated values), voltages |
|
|
|
| |
| No | No | No | No | |
| No | No | No | No | |
| Yes | Yes | Yes | Yes | |
| 100 k? | 100 k? | 50 k? | 100 k? | |
| Yes | Yes |
|
| |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | Yes | Yes | |
| 100 k? | 100 k? | 100 k? | 100 k? | |
| Yes | Yes | No | Yes | |
| 10 M? | 10 M? |
| 100 k? | |
| No | No | No | No | |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | Yes | Yes | |
| 100 k? | 100 k? | 50 k? | 100 k? | |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
Input ranges (rated values), currents |
|
|
|
| |
| Yes | Yes | Yes | Yes | |
| 25 ?; Plus approx. 42 ohms for overvoltage protection by PTC | 25 ?; Plus approx. 42 ohms for overvoltage protection by PTC | 41 ?; Plus approx. 42 ohms for overvoltage protection by PTC | 25 ?; Plus approx. 42 ohms for overvoltage protection by PTC | |
| Yes | Yes | Yes | Yes | |
| 25 ?; Plus approx. 42 ohms for overvoltage protection by PTC | 25 ?; Plus approx. 42 ohms for overvoltage protection by PTC | 41 ?; Plus approx. 42 ohms for overvoltage protection by PTC | 25 ?; Plus approx. 42 ohms for overvoltage protection by PTC | |
| Yes | Yes | Yes | Yes | |
| 25 ?; Plus approx. 42 ohms for overvoltage protection by PTC | 25 ?; Plus approx. 42 ohms for overvoltage protection by PTC | 41 ?; Plus approx. 42 ohms for overvoltage protection by PTC | 25 ?; Plus approx. 42 ohms for overvoltage protection by PTC | |
Input ranges (rated values), thermocouples |
|
|
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| No |
|
|
| |
| No | No | No | No | |
Input ranges (rated values), resistance thermometer |
|
|
|
| |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| Yes; Standard/climate | Yes; Standard/climate | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
| Yes; Standard/climate | Yes; Standard/climate | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
| Yes; Standard/climate | Yes; Standard/climate | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
| No | No | No | No | |
| No |
| No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| No | No | No | No | |
| Yes; Standard/climate | Yes; Standard/climate | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
| Yes; Standard/climate | Yes; Standard/climate | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
| Yes; Standard/climate | Yes; Standard/climate | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
| Yes; Standard/climate | Yes; Standard/climate | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
Input ranges (rated values), resistors |
|
|
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| No | No | No | No | |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
| Yes | Yes | No | No | |
| 10 M? | 10 M? |
|
| |
Thermocouple (TC) |
|
|
|
| |
Temperature compensation |
|
|
|
| |
| Yes | Yes |
|
| |
| Yes | Yes |
|
| |
| Yes | Yes |
|
| |
| Yes; fixed value can be set | Yes; fixed value can be set |
|
| |
| No | Yes |
|
| |
Cable length |
|
|
|
| |
| 800 m; for U/I, 200 m for R/RTD, 50 m for TC | 800 m; for U/I, 200 m for R/RTD, 50 m for TC | 800 m | 800 m | |
Analog value generation for the inputs |
|
|
|
| |
Integration and conversion time/resolution per channel |
|
|
|
| |
| 16 bit | 16 bit | 16 bit | 24 bit; When using the function "Scaling of the measured values" or "Measuring range adaptation" (32-bit REAL format); 16 bit when using the S7 format (16-bit INTEGER) | |
| Yes | Yes |
| Yes | |
| 2,5 / 16,67 / 20 / 100 ms | 2,5 / 16,67 / 20 / 100 ms |
| Fast mode: 2.5 / 16.67 / 20 / 100 ms, standard mode: 7.5 / 50 / 60 / 300 ms | |
| 9 / 23 / 27 / 107 ms | 9 / 23 / 27 / 107 ms |
| Fast mode: 4 / 18 / 22 / 102 ms; Standard mode: 9 / 52 / 62 / 302 ms | |
| 9 ms (to be considered in R/RTD/TC measurement) | 9 ms (to be considered in R/RTD/TC measurement) |
|
| |
| 150 ohm, 300 ohm, 600 ohm, Pt100, Pt200, Ni100: 2 ms, 6000 ohm, Pt500, Pt1000, Ni1000, LG-Ni1000, PTC: 4 ms | 150 ohm, 300 ohm, 600 ohm, Pt100, Pt200, Ni100: 2 ms, 6000 ohm, Pt500, Pt1000, Ni1000, LG-Ni1000, PTC: 4 ms |
|
| |
| 400 / 60 / 50 / 10 | 400 / 60 / 50 / 10 Hz |
| 400 / 60 / 50 / 10 Hz | |
|
|
|
| Corresponds to the channel with the highest basic conversion time | |
|
|
| 62.5 µs; independent of number of activated channels |
| |
| Basic conversion time of the slowest channel | Basic conversion time of the slowest channel |
|
| |
Smoothing of measured values |
|
|
|
| |
| Yes | Yes | Yes | Yes | |
| Yes | Yes | Yes | Yes | |
| Yes | Yes | Yes | Yes | |
| Yes | Yes | Yes | Yes | |
| Yes | Yes | Yes | Yes | |
Encoder |
|
|
|
| |
Connection of signal encoders |
|
|
|
| |
| Yes | Yes | Yes | Yes | |
| Yes | Yes | Yes | Yes; with external transmitter supply | |
| 820 ? | 820 ? | 820 ? |
| |
| Yes | Yes | Yes | Yes | |
| Yes; Only for PTC | Yes; Only for PTC | No | No | |
| Yes; All measuring ranges except PTC; internal compensation of the cable resistances | Yes; All measuring ranges except PTC; internal compensation of the cable resistances | No | No | |
| Yes; All measuring ranges except PTC | Yes; All measuring ranges except PTC | No | No | |
Errors/accuracies |
|
|
|
| |
Linearity error (relative to input range), (+/-) | 0.02 % | 0.02 % | 0.02 % | 0.02 % | |
Temperature error (relative to input range), (+/-) | 0.005 %/K; with TC type T 0.02 +/- %/K | 0.005 %/K; with TC type T 0.02 +/- %/K | 0.005 %/K | 0.005 %/K | |
Crosstalk between the inputs, max. | -80 dB | -80 dB | -60 dB | -80 dB | |
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.02 % | 0.02 % | 0.02 % | 0.02 % | |
Temperature error of internal compensation | +/-6 °C | +/-6 °C |
|
| |
Operational error limit in overall temperature range |
|
|
|
| |
| 0.3 % | 0.3 % | 0.3 % | 0.1 % | |
| 0.3 % | 0.3 % | 0.3 % | 0.1 % | |
| 0.3 % | 0.3 % |
|
| |
| 0.3 %; Ptxxx standard: ±1.5 K, Ptxxx climate: ±0.5 K, Nixxx standard: ±0.5 K, Nixxx climate: ±0.3 K | Ptxxx standard: ±1.5 K, Ptxxx climate: ±0.5 K, Nixxx standard: ±0.5 K, Nixxx climate: ±0.3 K |
|
| |
| 0.3 %; Type B: > 600 °C ±4.6 K, type E: > -200 °C ±1.5 K, type J: > -210 °C ±1.9 K, type K: > -200 °C ±2.4 K, type N: > -200 °C ±2.9 K, type R: > 0 °C ±4.7 K, type S: > 0 °C ±4.6 K, type T: > -200 °C ±2.4 K | Type B: > 600 °C ±4.6 K, type E: > -200 °C ±1.5 K, type J: > -210 °C ±1.9 K, type K: > -200 °C ±2.4 K, type N: > -200 °C ±2.9 K, type R: > 0 °C ±4.7 K, type S: > 0 °C ±4.6 K, type T: > -200 °C ±2.4 K |
|
| |
Basic error limit (operational limit at 25 °C) |
|
|
|
| |
| 0.1 % | 0.1 % | 0.2 % | 0.05 % | |
| 0.1 % | 0.1 % | 0.2 % | 0.05 % | |
| 0.1 % | 0.1 % |
|
| |
| 0.1 %; Ptxxx standard: ±0.7 K, Ptxxx climate: ±0.2 K, Nixxx standard: ±0.3 K, Nixxx climate: ±0.15 K | Ptxxx standard: ±0.7 K, Ptxxx climate: ±0.2 K, Nixxx standard: ±0.3 K, Nixxx climate: ±0.15 K |
|
| |
| 0.1 %; Type B: > 600 °C ±1.7 K, type E: > -200 °C ±0.7 K, type J: > -210 °C ±0.8 K, type K: > -200 °C ±1.2 K, type N: > -200 °C ±1.2 K, type R: > 0 °C ±1.9 K, type S: > 0 °C ±1.9 K, type T: > -200 °C ±0.8 K | Type B: > 600 °C ±1.7 K, type E: > -200 °C ±0.7 K, type J: > -210 °C ±0.8 K, type K: > -200 °C ±1.2 K, type N: > -200 °C ±1.2 K, type R: > 0 °C ±1.9 K, type S: > 0 °C ±1.9 K, type T: > -200 °C ±0.8 K |
|
| |
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency |
|
|
|
| |
| 40 dB | 40 dB |
| 80 dB; in the Standard operating mode, 40 dB in the Fast operating mode | |
| 10 V | 10 V | 10 V | 60 V DC/30 V AC | |
| 60 dB | 60 dB | 50 dB at 400 Hz; 60 dB at 60 / 50 / 10 Hz | 80 dB | |
Isochronous mode |
|
|
|
| |
Isochronous operation (application synchronized up to terminal) | No | No | Yes | No | |
Filtering and processing time (TCI), min. |
|
| 80 µs |
| |
Bus cycle time (TDP), min. |
|
| 250 µs |
| |
Interrupts/diagnostics/status information |
|
|
|
| |
Diagnostics function | Yes | Yes | Yes | Yes | |
Alarms |
|
|
|
| |
| Yes | Yes | Yes | Yes | |
| Yes; two upper and two lower limit values in each case | Yes; two upper and two lower limit values in each case | Yes; two upper and two lower limit values in each case | Yes; two upper and two lower limit values in each case | |
Diagnostic messages |
|
|
|
| |
| Yes | Yes | Yes | Yes | |
| Yes; Only for 1 to 5 V, 4 to 20 mA, TC, R, and RTD | Yes; Only for 1 to 5 V, 4 to 20 mA, TC, R, and RTD | Yes; only for 1 ... 5 V and 4 ... 20 mA | Yes; only for 1 ... 5 V and 4 ... 20 mA | |
| Yes | Yes | Yes | Yes | |
Diagnostics indication LED |
|
|
|
| |
| Yes; Green LED | Yes; Green LED | Yes; Green LED | Yes; Green LED | |
| Yes; Red LED | Yes; Red LED | Yes; Red LED | Yes; Red LED | |
| Yes; Green LED | Yes; Green LED | Yes; Green LED | Yes; Green LED | |
| Yes; Green LED | Yes; Green LED | Yes; Green LED | Yes; Green LED | |
| Yes; Red LED | Yes; Red LED | Yes; Red LED | Yes; Red LED | |
| Yes; Red LED | Yes; Red LED | Yes; Red LED | Yes; Red LED | |
Potential separation |
|
|
|
| |
Potential separation channels |
|
|
|
| |
| No | No | No | Yes | |
| 4 | 8 | 8 | 1 | |
| Yes | Yes | Yes | Yes | |
| Yes | Yes | Yes | Yes | |
Permissible potential difference |
|
|
|
| |
between different circuits |
|
|
| 60 V DC/30 V AC; insulation rated for 120 V AC basic insulation: between the channels and the supply voltage L+; between the channels and the backplane bus; between the channels | |
between the inputs (UCM) | 20 V DC | 20 V DC | 20 V DC |
| |
Between the inputs and MANA (UCM) | 10 V DC | 10 V DC | 10 V DC |
| |
Isolation |
|
|
|
| |
Isolation tested with | 707 V DC (type test) | 707 V DC (type test) | 707 V DC (type test) | 2 000 V DC between the channels and the supply voltage L+; 2 000 V DC between the channels and the backplane bus; 2 000 V DC between the channels; 707 V DC (type test) between the supply voltage L+ and the backplane bus | |
Ambient conditions |
|
|
|
| |
Ambient temperature during operation |
|
|
|
| |
| 0 °C | 0 °C | 0 °C | 0 °C | |
| 60 °C | 60 °C | 60 °C | 60 °C | |
| 0 °C | 0 °C | 0 °C | 0 °C | |
| 40 °C | 40 °C | 40 °C | 40 °C | |
Decentralized operation |
|
|
|
| |
Prioritized startup | No | No | Yes | Yes | |
Dimensions |
|
|
|
| |
Width | 25 mm | 35 mm | 35 mm | 35 mm | |
Height | 147 mm | 147 mm | 147 mm | 147 mm | |
Depth | 129 mm | 129 mm | 129 mm | 129 mm | |
Weights |
|
|
|
| |
Weight, approx. | 210 g | 310 g | 300 g | 280 g | |
Other |
|
|
|
| |
Note: | Supplied incl. 40-pole push-in front connectors. Additional basic error and noise for integration time = 2.5 ms: Voltage: ±250 mV (±0.02%), ±80 mV (±0.05%), ±50 mV (±0.05%); resistance: 150 Ohms (±0.02%); resistance thermometer: Pt100 climate: ±0.08 K, Ni100 climate: ±0.08 K; thermoelement: Type B, R, S: ±3 K, type E, J, K, N, T: ±1 K | Additional basic error and noise for integration time = 2.5 ms: Voltage: ±250 mV (±0.02%), ±80 mV (±0.05%), ±50 mV (±0.05%); resistance: 150 ohms ±0.02%; resistance thermometer: Pt100 climate: ±0.08 K, Ni100 climate: ±0.08 K; thermocouple: Type B, R, S: ±3 K, type E, J, K, N, T: ±1 K |
|
|
Article number | 6ES7531-7PF00-0AB0 | |
---|---|---|
| S7-1500, AI 8 X U/R/RTD/TC HF | |
General information |
| |
Product type designation | AI 8xU/R/RTD/TC HF | |
HW functional status | FS01 | |
Firmware version | V1.1.0 | |
| Yes | |
Product function |
| |
| Yes; I&M0 to I&M3 | |
| Yes | |
| No | |
| No | |
Engineering with |
| |
| V14 / - | |
| V5.5 SP3 / - | |
| V1.0 / V5.1 | |
| V2.3 / - | |
Operating mode |
| |
| No | |
| Yes | |
CiR – Configuration in RUN |
| |
Reparameterization possible in RUN | Yes | |
Calibration possible in RUN | Yes | |
Supply voltage |
| |
Rated value (DC) | 24 V | |
permissible range, lower limit (DC) | 20.4 V | |
permissible range, upper limit (DC) | 28.8 V | |
Reverse polarity protection | Yes | |
Input current |
| |
Current consumption, max. | 55 mA; with 24 V DC supply | |
Power |
| |
Power available from the backplane bus | 0.85 W | |
Power loss |
| |
Power loss, typ. | 1.9 W | |
Analog inputs |
| |
Number of analog inputs | 8; Plus one additional RTD (reference) channel | |
| 8; Plus one additional RTD (reference) channel | |
| 8; Plus one additional RTD (reference) channel | |
| 8; Plus one additional RTD (reference) channel | |
permissible input voltage for voltage input (destruction limit), max. | 20 V | |
Technical unit for temperature measurement adjustable | Yes; °C/°F/K | |
Input ranges (rated values), voltages |
| |
| No | |
| No | |
| No | |
| Yes | |
| 10 M? | |
| No | |
| No | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| No | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
Input ranges (rated values), currents |
| |
| No | |
| No | |
| No | |
Input ranges (rated values), thermocouples |
| |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| No | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
Input ranges (rated values), resistance thermometer |
| |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
| Yes; Standard/climate | |
| 10 M? | |
Input ranges (rated values), resistors |
| |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
| No | |
| Yes | |
| 10 M? | |
| Yes | |
| 10 M? | |
Thermocouple (TC) |
| |
Temperature compensation |
| |
| Yes | |
| Yes | |
| Yes | |
| Yes; fixed value can be set | |
| Yes; 9th channel that can be used as a genuine 9th RTD channel regardless of the parameterization of the other channels, or that can be used for compensation in the case of TC measurement | |
Cable length |
| |
| 800 m; at U; 200 m at R/RTD/TC | |
Analog value generation for the inputs |
| |
Integration and conversion time/resolution per channel |
| |
| 21 bit; For measuring mode RTC and TC when using the function "Scalable temperature measuring range" (32-bit REAL format); 16-bit for measuring mode R and U; 16 bit for all measuring modes when using the S7 format (16-bit INTEGER) | |
| Yes | |
| Fast mode: 2.5 / 16.67 / 20 / 100 ms, standard mode: 7.5 / 50 / 60 / 300 ms | |
| Fast mode: 4 / 18 / 22 / 102 ms; Standard mode: 9 / 52 / 62 / 302 ms | |
| Thermocouples, 150 Ohm, 300 Ohm, 600 Ohm, Cu10, Cu50, Cu100, Ni10, Ni50, Ni100, Ni120, Ni200, Pt10, Pt50, Pt100, Pt200: 4 ms; 6 kOhm, Ni500, Ni1000, LG-Ni1000, Pt500, Pt1000: 13 ms | |
| 400 / 60 / 50 / 10 Hz | |
| Corresponds to the channel with the highest basic conversion time | |
Smoothing of measured values |
| |
| Yes | |
| Yes | |
| Yes | |
| Yes | |
| Yes | |
Encoder |
| |
Connection of signal encoders |
| |
| Yes | |
| No | |
| No | |
| Yes | |
| Yes; All measuring ranges except PTC; internal compensation of the cable resistances | |
| Yes; All measuring ranges except PTC | |
Errors/accuracies |
| |
Linearity error (relative to input range), (+/-) | 0.02 % | |
Temperature error (relative to input range), (+/-) | 0.005 %/K | |
Crosstalk between the inputs, max. | -80 dB | |
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.02 % | |
Temperature error of internal compensation | +/-1,5 °C | |
Operational error limit in overall temperature range |
| |
| 0.1 % | |
| 0.1 % | |
| Cuxxx Standard: ±0.5 K, Cuxxx Klima: ±0.5 K, Ptxxx Standard: ±1 K, Ptxxx Klima: ±0.5 K, Nixxx Standard: ±0.5 K, Nixxx Klima: ±0.3 K | |
| Type B: > 600 °C ±2 K, Type E: > -200 °C ±1 K, Type J: > -210 °C ±1 K, Type K: > -200 °C ±2 K, Type N: > -200 °C ±2 K, Type R: > 0 °C ±2 K, Type S: > 0 °C ±2 K, Type T: > -200 °C ±1 K, Type C: ±4 K, Type TXK/TXK(L): ±1 K | |
Basic error limit (operational limit at 25 °C) |
| |
| 0.05 % | |
| 0.05 % | |
| Cuxxx Standard: ±0.3 K, Cuxxx Klima: ±0.2 K, Ptxxx Standard: ±0.5 K, Ptxxx Klima: ±0.2 K, Nixxx Standard: ±0.3 K, Nixxx Klima: ±0.15 K | |
| Type B: > 600 °C ±1 K, Type E: > -200 °C ±0.5 K, Type J: > -210 °C ±0.5 K, Type K: > -200 °C ±1 K, Type N: > -200 °C ±1 K, Type R: > 0 °C ±1 K, Type S: > 0 °C ±1 K, Type T: > -200 °C ±0.5 K, Type C: ±2 K, Type TXK/TXK(L): ±0.5 K | |
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency |
| |
| 80 dB; in the Standard operating mode, 40 dB in the Fast operating mode | |
| 60 V DC/30 V AC | |
| 80 dB | |
Isochronous mode |
| |
Isochronous operation (application synchronized up to terminal) | No | |
Interrupts/diagnostics/status information |
| |
Diagnostics function | Yes | |
Alarms |
| |
| Yes | |
| Yes; two upper and two lower limit values in each case | |
Diagnostic messages |
| |
| Yes | |
| Yes; Only with TC, R, RTD | |
| Yes | |
Diagnostics indication LED |
| |
| Yes; Green LED | |
| Yes; Red LED | |
| Yes; Green LED | |
| Yes; Green LED | |
| Yes; Red LED | |
| Yes; Red LED | |
Potential separation |
| |
Potential separation channels |
| |
| Yes | |
| 1 | |
| Yes | |
| Yes | |
Permissible potential difference |
| |
between different circuits | 60 V DC/30 V AC; insulation rated for 120 V AC basic insulation: between the channels and the supply voltage L+; between the channels and the backplane bus; between the channels | |
Isolation |
| |
Isolation tested with | 2 000 V DC between the channels and the supply voltage L+; 2 000 V DC between the channels and the backplane bus; 2 000 V DC between the channels; 707 V DC (type test) between the supply voltage L+ and the backplane bus | |
Ambient conditions |
| |
Ambient temperature during operation |
| |
| 0 °C | |
| 60 °C | |
| 0 °C | |
| 40 °C | |
Decentralized operation |
| |
Prioritized startup | Yes | |
Dimensions |
| |
Width | 35 mm | |
Height | 147 mm | |
Depth | 129 mm | |
Weights |
| |
Weight, approx. | 290 g | |
Other |
| |
Note: | For the R/RDT three-wire measurement, the conductor compensation is made alternating with the measurement. This then requires two module cycles for a measured value. |
產品咨詢
聯系我們
上海翰粵自動化系統有限公司 公司地址:上海市松江區思賢路2399弄137號 技術支持:化工儀器網掃一掃 更多精彩
微信二維碼
網站二維碼